How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add a second key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then a new key and transponder must be purchased and programmed to the car.
Rotate your keys to prevent one from wearing out faster than another. This will help keep your keys in perfect condition.
Replacement Case
The new key fobs aren't like the old Saab keys. They're equipped with electronic devices which make it hard to copy. That has made car theft significantly more difficult than it was just a few years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners should have two keys working. If one is lost it is expensive to get another one for the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are a few ways to avoid these costly. Some parts providers can look up the code from an old key (usually the same one that opens the doors and turns on the ignition) and cut a new key blade from metal for only a fraction of the dealer's cost. The key must, however, be identical to the original one in order to function within your car.
Follow these steps to replace the case. You'll need a flathead and patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once saab key programming near me has been opened, remove all electronics and place them into the new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap part that can be replaced easily and quickly. The YouTube video of Cyclone Cyd shows how to replace the remote fob battery with just four simple steps. This tutorial should work with any modern Saab key fob. However, the procedure could differ slightly.
This button is usually located just below the Saab logo on the back of the fob. It's usually close to the Saab logo on the back of the fob. Next take the flathead screwdriver to insert into the tiny hole in this button. This should be sufficient to allow you to open the fob case in order to change the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob, and then program it to your car. The whole process should take more than an hour or less. This is a very easy procedure that doesn't require special tools.
If you lose a key the procedure will be slightly more complicated but it is still able to be done. The dealer will need to read the car's VIN and then order a new key blade and TWICE module that has the correct unique code. After that, they'll have to cut the new key and then program it using a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is the part that locks and unlocks your car, it's got batteries inside. The batteries last for a certain time, and they will eventually die. It's a common issue in all vehicles. The good news is you can replace the battery in most key fobs, and not have to replace the entire case. Amazon sells replacement fobs that already have all the electronic components installed. It is easy to open the case and replace the batteries. It is necessary to remove the emergency key before you can replace the batteries. To do this, place a small flathead screwsdriver into the slot that is in the middle of the. The case will split when you work the screwdriver all around it.
If you're planning to replace your keys, have an extra set on hand. This will save you a significant amount of money. If you have an extra key, you can ask the dealer to cut it in half and program it to your car. This is much cheaper than purchasing a new fob.
If you do not have a spare key you can add a second key to your car, however it requires a lot of research and effort. Adding a second key costs about a few hundred dollars and it also requires programming of the car's computer. Professionals can do this but it's not a cheap option.
Replacement Ignition
As opposed to the earlier Saab automobiles, the new SAAB 9-3 models are equipped with an extremely sophisticated alarm system that is built around a coded key. If you lose your only key, it may be expensive to add another one since the car must have a special computer added and be programmed to accept a brand new key. The majority of locksmiths aren't able to do this or even dealers can charge several hundreds of dollars just to program the new key!
If you've lost your only working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and will charge you the highest price for it. We can reprogramme the existing EEPROM on your car's computer so that it's ready to accept an additional key. This will save you more than 50% off the cost you would pay at a dealer.
If you've owned a SAAB 9-3 quite a while and you're aware of the ignition keys aren't very durable. They can become extremely sticky, and the buttons are known to fall off at times and you should think about getting a replacement if yours isn't working properly. The good news is that replacing the ignition key isn't as difficult as it sounds, and it can be done fairly quickly using the right tools.